Replacement gasket kit for our All Sky cameras.
All sky camera housing manufactured for use with the QHY5L-II or Orion StarShoot AutoGuider cameras. The housing is manufactured from a solid billet of Acetal Resin (Delrin TM). The camera is held in place with two nylon set screws at the top and by a soft sealing O-ring at the bottom. The O-ring isolates the lower housing from the upper housing. The upper housing includes an upper seal ring designed to provide a moisture seal between the acrylic dome and the housing body. Eight #10 stainless steel screws hold the seal ring to the housing. The lower housing also has a sealing cap that includes an O-ring and six #6 screws. There is a milled slot under the cap and an egress hole for the camera USB cable. When the installation is finalized a dab of RTV sealant on the cable right at the O-ring will provide a proper seal. Replacement seal kits and acrylic domes are available from us should you require them.