All sky camera housing manufactured for use with the QHY5L-II or Orion StarShoot AutoGuider cameras. The housing is manufactured from a solid billet of Acetal Resin (Delrin TM). The camera is held in place with two nylon set screws at the top and by a soft sealing O-ring at the bottom. The O-ring isolates the lower housing from the upper housing. The upper housing includes an upper seal ring designed to provide a moisture seal between the acrylic dome and the housing body. Eight #10 stainless steel screws hold the seal ring to the housing. The lower housing also has a sealing cap that includes an O-ring and six #6 screws. There is a milled slot under the cap and an egress hole for the camera USB cable. When the installation is finalized a dab of RTV sealant on the cable right at the O-ring will provide a proper seal. Replacement seal kits and acrylic domes are available from us should you require them.
Replacement Acrylic dome for your All Sky camera housing. We only sell these domes to our customers who have purchased our All Sky camera system.